Elpro Technologies 245U-E Manual do Utilizador descarregar pdf (Página 4)

ELPRO Technologies is an ISO 9001:2008

Quality Assured Company.

THINK WIRELESS... THINK ELPRO

Technologies

Contact ELPRO

Web site www.elprotech.com

E-mail sales@elprotech.com

Technical Support:

USA/Canada +1 866 713 4409

Other countries +61 7 3352 8624

Regional Offices:

Americas + 1 619 741 3574

Australasia + 61 7 3352 8600

Singapore + 65 6487 7887

Europe + 44 1582 723633

China + 86 01085625718-868

YOUR LOCAL PARTNER:

Wireless Ethernet Modem

945U-E

Elp_bro_945U-E_v2.0

Wireless Speciﬁcations

Frequency band USA: 902-928MHz; 1 - 54Mbps (conﬁgurable)

AUS: 915-928MHz; 0.25 - 13.5Mbps (conﬁgurable)

‘Auto mode’ determines fastest rate possible relative to RSSI.

Receiver sensitivity USA: -95 dBm @ 1 Mbps - 72 dBm @ 54 Mbps

AUS: -95 dBm @ 0.25 Mbps; -72dBm @ 13.5Mbps

Channel Spacing 4 x 5MHz; 4 x 10MHz; 2 x 20MHz channels*.

Transmit Power USA: 1-24 Mbps:630mW (28dBm) - 54Mbps:250mW (24dBm)

AUS: 0.25-6Mbps:630mW (28dBm); 13.5Mbps:250mW (24dBm)

Line of sight range 6+ miles/ 10+ km @ 630 mW

(Range may be extended using WDS, antenna diversity)

Antenna connector USA/AUS: 2 x Female SMA (Surge diverter: CSD-SMA-2500)

(2 x antennas for signal diversity or high gain receive antenna)

System Conﬁguration Parameters

System address

(ESSID)

1 - 31 character text string

Security

Data encryption• To WPA2 PSK - 802.11i - 802.1x

Password• https accessibility

Bandwidth Protection

MAC Address•

IP Filtering•

ARP Filtering•

Whitelist/ Blacklist

Conﬁgurable Access Point or Client/ Bridge or Router Broadcast or Control.

Mode - Point to Point, Point to Multi-point. WDS Wireless

Distribution System (AP - AP repeater functionality).

Modbus TCP/ RTU Gateway.

Serial client/ server/ multicast, simultaneous RS232/ 485

connection.

On-board Modbus Master for I/O transfer.

Protocols supported TCP/ IP, UDP, ARP, SNMP, RADIUS/ 802.1x, DHCP,

DNS, PPP, ICMP, HTTP, FTP, TFTP, TELNET.

User Conﬁguration Embedded web page default URL.

Discrete I/O

Input voltage-free contact/ output FET 30VDC 500mA. Used to

transfer input/ output status: communications failure output.

Diagnostics

Diagnostics/ LED

indication

Power/OK; RX; TX/Link; RS232; LAN; RS485;

Digital I/O status

Reported diagnostics RSSI measurement in dBm. Connectivity information/

statistics. System Log ﬁle.

Ethernet Port

Indication

Link/ 100 Mbps

Ethernet Port

Standard 10/ 100 BaseT; RJ45 - IEEE 802.3

Serial Port

RS232 DB9 female DCE; RTS/ CTS/ DTR/ DCD

(hardware signals provided)

RS485 2 pin terminal block

(max distance 4000’/1.2km - non isolated)

Data rate (bps)

conﬁgurable

1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600,

76800, 115200, 230400.

7 or 8 data bits, Stop/ start/ parity bits conﬁgurable.

General

Compliances

EMC• EN 301 489 - 17; FCC Part 15

Radio• EN 300 328; FCC Part 15.247, RSS 210

CSA• Class I, Division 2 (pending)

Safety• EN 60950

Size 4.5 x 6.7 x 1.2”/ 114 x 168 x 30 mm

Housing Powder-coated, extruded aluminium

Mount DIN rail

Terminal blocks Removable; Max conductor 12 AWG (2.5mm

)

Temperature -40 to +60°C ; -40 to +140°F

Humidity 0 – 99% RH non-condensing

Weight <0.5kg (<1lb)

Power Supply

Nominal supply 9 to 30VDC; under/ over voltage protection

Average current draw Idle 12V - 270mA; Idle 24V - 140mA

Transmit current draw Full TX (630mW) 12V - 470mA;

Full TX (630mW) 24V - 250mA

Note: Speciﬁcations subject to change

* Country Regulation Dependent.•

Ordering Information

When ordering, please specify the following:

Order Code Description Frequency RF Power

945U-E Wireless Ethernet 802.11,

900MHz high speed.

907-922MHz DSSS 630mW

Note: Speciﬁcations subject to change.

Specify country of application on ordering.•

RF power and frequency may vary depending on country of application.•

1 2 3 4

Comentários a estes Manuais

Sem comentários

Elpro Technologies 245U-E Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Elpro Technologies 245U-E